工业除湿机如何调试?

2022-02-18 16:18

将除湿机电源插入到电源插座,这是电源就接通电了。然后我们就可以找到除湿机的界面控制。

此时面板上有很多按钮,这是我们先按下面板上的开关按钮,将除湿机打开。

打开电源之后,此时除湿机就会开始工作,前面会有排风口出来,用于除湿。

面板上面,会显示很多功能,湿度,代表的是室内空气的湿度,除湿时,湿度会降低。

除湿机的使用条件是室温15-30℃(也有15-35℃);相对湿度在70%以上就可以开机使用了。

当相对湿度低于50%,这个时候就不必要使用除湿机了,因为相对湿度50%已经是生产上比较合适的空气湿度了,不会对工业生产造成影响,除非你的产品有特殊要求,需要将空气湿度控制在50%以下,甚至更低,否则的话,只能是在浪费能源。

或者空气露点温度低于4℃,这个时候也不宜使用,在这样时候,空气湿度也基本很低了。

Plug the dehumidifier into the power socket first. Then we can find the interface control of the dehumidifier.

At this time, there are many buttons on the panel. We first press the switch button on the lower board to turn on the dehumidifier.

After the power is turned on, the dehumidifier will start working, and there will be an exhaust outlet in front for dehumidification.

Many functions will be displayed on the panel. Humidity represents the humidity of indoor air. During dehumidification, the humidity will be reduced.

The service condition of dehumidifier is room temperature 15-30 ℃ (also 15-35 ℃); When the relative humidity is more than 70%, it can be turned on and used.

When the relative humidity is lower than 50%, it is unnecessary to use the dehumidifier, because the relative humidity of 50% is the most appropriate air humidity in production and will not affect industrial production. Unless your product has special requirements and needs to control the air humidity below 50%, or even lower, it can only be a waste of energy.

Or the air dew point temperature is lower than 4 ℃, which is not suitable for use at this time. At this time, the air humidity is basically very low.